(ADH version available in cartridges)
ASPECT MIX RATIO
2- COMPONENT SYSTEMS
- COLD OR MT CURING
AS52/AW12
(ADH52.12)
Fluid
Trasparent
Light yellow
by weight
MIX RATIO
by volume
POT LIFE
(100ml, RT)
minutes
HANDLING
TIME
(25°C)
100:100
100:100 5-6 24 h 25°C or more 11-13 Alluminium
50 11-13 Stainless Steel
AS53/AW11
Fluid
Trasparent
Colourless
24 h 25°C or more 9-11 Alluminium
50 11-13 Stainless Steel
AS88/AW11
(ADH88.11)
Thixotropic
Milky
20 min
20 min
100:100
100:100 24 h 25°C or more 11-13 Alluminium
50 15-17 Stainless Steel
AS44/AW09 Light thixo
AS89/AW09
(ADH89.09)
Amber
Thixotropic
Amber
20 min
7 h
100:80
100:100 RT+6 h 80°C 14-16 Alluminium
70 11-13 Stainless Steel
2-3
2-3
25-40
Heavy thixo
Milky
7 h
100:80
100:100 RT+6 h 80°C 30-37 Alluminium
AS90/AW42 70
(ADH90.42)
30-45 17-21 Stainless Steel
100:100
100:100
AS89/AW89
(ADH89.89)
Thixotropic
Black
Contrasting
colours
7 h
100:45
100:50 2 h 80°C 27-33 Alluminium
20-30 90 37-33 Stainless Steel
AS90/AW90
(ADH90.90)
Thixotropic
Light
contrasting
colours
No sag till
10 mm
100:45
100:50
7 days at RT
or 5 h 70°C
22 Epoxy Laminates
>12 Polyestere Laminates
4 h
10-15 75
35-45
60-80
80
80
AS90/AW91
(ADH90.91)
AS90/AW92
AS45/AW45
Filled
Thixotropic
Dark grey
Contrasting
colours
3 h
6 h
11 h
100:40÷50
100:43÷53 RT+6 h 80°C 8 -11 Alluminium
20-30 100 37-33 Stainless Steel
AS50/AW50
(ADH50.50)
Filled
Heavy thixo
Dark grey
Contrasting
colours
4 h
100:50
100:50 RT+6 h 80°C >8 Polyestere
20-30 2 h
105 10 Epoxy Laminates
3 h
(*) The suggested curing cycle refers to the maximum adhesive properties. For different curing cycles refers to data sheets.
1- COMPONENTS SYSTEMS
- HOT CURING
100:80
100:100 40-50 RT+6 h 80°C 21-26 Alluminium
70 20-25 Stainless Steel
PC36L/G30
Filled PU
Thixotropic
Yellow
100:25
4-8 1-2 days at RT 45 7-9 Alluminium
100:30 4-5 PMMA
ASM 030
(ADH030)
Thixotropic
Milky
No sag at
higt T
1-COMP 2 h at 120°C
14-16 Alluminium
n.a. 135 10 Epoxy Laminates
ASM 105
Filled
Heavy thixio
Blue
n.a.
1-COMP n.a. 2 h at 120°C 90 20-27 Stainless Steel
n.a.
SUGGESTED
CURING
CYCLE (*)
SHEAR
STRENGTH
(N/mm2) =MPa
Tg°C MAX
SCtorumcptuornael nAtds hKeosmivpeos nSetnruteknturverklebungen
EMC filters
Funkentstörfilter
Capacitors
Kondensatoren
Power semiconductors
Leistungshalbleiter
LED display
LED Anzeigen
Elan-tron®
PU 4130 FR / PH 4900
Self-extinguishing acc. UL 94, UL-approved, Tough-elastic moulding
polyurethane system.
Zäh-elastisches, selbstverlöschendes (zugelassen nach UL 94 Klasse V0)
2K-PU-System, einsetzbar bis 120 °C (Klasse E).
Two component filled epoxy system, room temperature curing,
UL listed with HAI, HWI, operating temperature 155°C.
Gefülltes 2K-EP-System, kalthärtend, einsetzbar bis 155 °C (Klasse F),
UL-zugelassen (UL 94 Klasse V0, HAI und HWI).
Elan-tron®
MC 62 / W 363
Elan-tron®
MC 41 / WH 441
Two component filled Epoxy system, hot temperature curing, UL listed,
high thermal stability and resistance (180°C).
Heißhärtendes 2K-EP-System, thermisch hoch belastbar
(Klasse H - 180 °C).
Elan-tron®
PU 525 / PH 27
Two component Polyurethane system, UL listed - Thermal conductivity 0,85
W/m°K, operating temperature till 130°C.
2K-PU-System, selbstverlöschend (zugelassen nach UL 94 Klasse V0),
hohe Wärmeleitfähigkeit (0,85 W/mK), einsetzbar bis 130 °C (Klasse B).
Elan-tron®
PU 746 / PH 231
Elan-tron®
PU 4147 FR/PH 4920
Two component Polyurethane system, RT curing, semi-transparent,
very soft. Operation temperature till 130°C.
Semitransparentes kalthärtendes 2K-PU-System, weich-elastisch,
einsetzbar bis 130 °C (Klasse B).
Two component semi-rigid PU system, high thermal conductivity
(0,7 W/mK), UL regognised (UL 94 V0), RTI = 120 (UL 746 B).
Zäh-hartes 2K-PU-System, hohe Wärmeleitfähigkeit (0,7 W/mK),
UL-zugelassen (UL 94 Klasse V0 sowie RTI mech. 120 °C gem. UL 746 B).
Elan-tron®
PU 4264 FR / PH 4920
Elan-tron®
PU 4440 / PH 4900
Two component, tough-elastic PU system, UL recognised (UL 94 V0),
maximum operation temperature 130 °C.
Zäh-elastisches 2K-PU-System, selbstverlöschend
(zugelassen nach UL 94 Klasse V0), einsetzbar bis 130 °C (Klasse B).
Two component elastic PU system, low viscosity,
UL recognised (UL 94 HB), max. operation temperature 130 °C.
Niedrigviskoses elastisches 2K-PU-System, selbstverlöschend
(zugelassen gem. UL 04 Klasse HB), einsetzbar bis 130 °C (Klasse B).
Electronic protection Schutz von elektronischen Baugruppen
Automotive electronic
Automobilelektronik
Sensors and Actuators
Sensoren und Aktuatoren
Safety devices
Sicherheitsrelevante Bauteile
Central Locks and Alarms
Zentralverriegelung und Alarmanlagen
Elan-tron®
PU 314 / PH 114
Two component filled polyurethane, listed UL 94 V0, flexible till -30°C.
Max operating temperature 140°C.
Selbstverlöschendes 2K-PU-System (zugelassen nach UL Klasse V0),
elastisch bis - 30 °C, einsetzbar bis 140 °C.
Two component Polyurethane system, very flowable,
room temperature curing. UL listed. Service temperature till 120°C.
Niedrigviskoses 2K-PU-System, selbstverlöschend
(zugelassen nach UL 94 Klasse V0), einsetzbar bis 120 °C (Klasse E).
Two component Polyurethane system, very flowable, fast curing.
UL listed. Service temperature till 120°C.
Niedrigviskoses schnellhärtendes 2K-PU-System, selbstverlöschend
(zugelassen nach UL 94 Klasse V0), einsetzbar bis 120 °C (Klasse E).
Elan-tron®
PU 311 / PH 27
Elan-tron®
PU 312 / PH 27
Elan-tron®
PU 430 / PH 30
Two component filled, very flexible polyurethane system, flame-retardant,
125° operating temperature.
Hochflexibles 2K-PU-System, selbstverlöschend, einsetzbar bis 125 °C.
Elan-tron®
PU H 04003 / PH 04003
Two component, black, filled polyurethane system suitable for use
at Class B temperature.
Gefültes 2K-PU-System, schwarz, einsetzbar bis 130 °C (Klasse B).
Elan-tron®
PU 04106 / PH 04106
Two component, black, semi-flexible, room temperature curing
polyurethane system.
Zäh-elastisches 2K-PU-System, schwarz, kalthärtend.