Properties
at 25 °C
EC 011
WH 011
EC 013
WH 013
EC 015 HT
WH 035 HT
Viscosity:
Resin (mPas)
Hardener (mPas)
1.300-1.700
380-500
1.100-1.400
350-450
10.000-14.000
500-700
Mixing ratio
(% by weight) 100:110 100:80 100:90
Initial mixture viscosity (mPas) 750-900 900-1.100 3.500-5.000
Suggested filler amount (% wt.) 315 250-350 285
Gelation time (minutes) 65-74 (110 °C) 45-55 (100 °C) 50-62 (100 °C)
Glass transition (°C) 65-70 36-38 110-120
Thermal class 155 °C 130 °C 200 °C
Dielectric constant 3,1-3,3 3,4-3,6 2,9-3,2
Loss tangent x 10-3 3-5 12-15 2-3
Volume resistivity (ohm·cm) 1-3 x 10^16 1-4 x 10^15 >1 x 10^17
Dielectric strength (kV/mm) 17-19 18-21 23-26
Flexural strength (MN/m2) 100-110 35-40 120-140
Strain at break (%) 12,0-13,0 >20 6,0-9,0
Flexural elastic modulus (MN/m2) 2.500-2.700 1.300-1.400 3.000-3.300
Tensile strength (MN/m2) 65-70 24-28 70-80
Elongation at break (%) 6,0-7,0 70-80 4,0-6,0
Applications Indoor transformers. Indoor transformers,
neon transformers.
Indoor transformers,
switch-disconnectors,
bushing plugs, motors.
Epoxy resins
for electrotechnical
applications
ELANTAS Europa offers a complete range
of products that can be used in electrical
engineering for the production of medium
voltage indoor and outdoor components,
with the possibility to produce selfextinguishing
castings where a high
fire protection (F1) is required, as in the
case of installations in closed spaces.
The developed systems are suitable for
power and measurement transformers,
insulators, bushings, plugs, etc. by means
of the production techniques normally
used such as: vacuum casting, manual
casting, and injection and gelation under
pressure (APG).
Unfilled systems
They are characterized by high electrical
and mechanical properties, controlled
viscosity and reactivity to allow the
dispersion of high amount of fillers,
maintaining high processability.
Pigments are available on request.
The most representative physico-chemical
characteristics of the main products are
reported in tables 1, 2. More information
is available on the technical data sheet
of the specific system. At ELANTAS
Europa ‘’Tailor Made’’ materials are also
available, developed to meet specific
application needs.
Properties
at 25 °C
EC 011
WH 011
EC 013
WH 013
EC 015 HT
WH 035 HT
Viscosity:
Resin (mPas)
Hardener (mPas)
1.300-1.700
380-500
1.100-1.400
350-450
10.000-14.000
500-700
Mixing ratio
(% by weight) 100:110 100:80 100:90
Initial mixture viscosity (mPas) 750-900 900-1.100 3.500-5.000
Suggested filler amount (% wt.) 315 250-350 285
Gelation time (minutes) 65-74 (110 °C) 45-55 (100 °C) 50-62 (100 °C)
Glass transition (°C) 65-70 36-38 110-120
Thermal class 155 °C 130 °C 200 °C
Dielectric constant 3,1-3,3 3,4-3,6 2,9-3,2
Loss tangent x 10-3 3-5 12-15 2-3
Volume resistivity (ohm·cm) 1-3 x 10^16 1-4 x 10^15 >1 x 10^17
Dielectric strength (kV/mm) 17-19 18-21 23-26
Flexural strength (MN/m2) 100-110 35-40 120-140
Strain at break (%) 12,0-13,0 >20 6,0-9,0
Flexural elastic modulus (MN/m2) 2.500-2.700 1.300-1.400 3.000-3.300
Tensile strength (MN/m2) 65-70 24-28 70-80
Elongation at break (%) 6,0-7,0 70-80 4,0-6,0
Applications Indoor transformers. Indoor transformers,
neon transformers.
Indoor transformers,
switch-disconnectors,
bushing plugs, motors.
Epoxy resins
for electrotechnical
applications
ELANTAS Europa offers a complete range
of products that can be used in electrical
engineering for the production of medium
voltage indoor and outdoor components,
with the possibility to produce selfextinguishing
castings where a high
fire protection (F1) is required, as in the
case of installations in closed spaces.
The developed systems are suitable for
power and measurement transformers,
insulators, bushings, plugs, etc. by means
of the production techniques normally
used such as: vacuum casting, manual
casting, and injection and gelation under
pressure (APG).
Unfilled systems
They are characterized by high electrical
and mechanical properties, controlled
viscosity and reactivity to allow the
dispersion of high amount of fillers,
maintaining high processability.
Pigments are available on request.
The most representative physico-chemical
characteristics of the main products are
reported in tables 1, 2. More information
is available on the technical data sheet
of the specific system. At ELANTAS
Europa ‘’Tailor Made’’ materials are also
available, developed to meet specific
application needs.