Elmotherm® and Aquanel® Finishing Varnishes from ELANTAS Europe are designed for operation in the harshest
environments.Whenever your goods are exposed to moisture, liquid and gaseous chemicals or dirt-protection
Elmotherm® and Aquanel® Finishing Varnishes ensure the highest durability. Our portfolio of finishing varnishes
includes solutions for all application requirements. Standard uses are the protection of
• motors
• generators
• transformers.
Convincing Performance
Varnishes consist of a polymeric binder and a solvent – their compositions define the final properties of the product.
As we do not want to leave our products properties to chance, we manufacture and formulate binder and solvent
ourselves. Your benefit: highest product quality with every supply. Based on modified alkyd or alkyd-polyurethane
resins, all Elmotherm® and Aquanel® Finishing Varnishes are drying at room temperature. Due to the good wetting
by the finishing varnishes your product will get the best protection against all types of aggressive environment.
Owing to their very good shelf life, Elmotherm® and Aquanel® Finishing Varnishes allow long-term application in
production or repair workshops.
Application Methods
Finishing varnishes are applied after the impregnation process with insulating materials, by dipping, brushing or
spraying. To simplify the coating by spraying we offer some types of finishing varnishes in spray cans, too. Elmotherm
® and Aquanel® Finishing Varnishes are dried at ambient temperature by standard. To accelerate the process,
the applied varnish can also be dried in ovens at up to 80 – 100 °C.
Product Viscosity Temperature
Index
Typical Cure
Schedule
Description (Ex Website /2016)
Elmotherm® F 93 A+B 10 – 20 s
ISO Cup 6 mm
23 °C
180 24 h / 23°C or
2 h / 100°C
Two component, solvented, finishing varnish, room
temperature curing, very good film forming, excellent
resistance to chemicals, available as colourless or oxide
red. For dip, brush or spray application.
Elmotherm® FS190 37 – 43 s
ISO Cup 6 mm
23 °C
155 24 h / 23°C or
2 h / 100°C
Single component, alkyd resin based, solvented
finishing varnish, very good film forming, good resistance
to moisture and chemicals, available colourless
or red oxide. For dip, brush or spray application.
Elmotherm® 009-0008 100 – 125 s
B4 Cup
21 °C
180 1 h / 23°C or
30 min / 80°C
Single component, UL recognised, alkyd resin based,
solvented finishing varnish, fast air drying, available
in a range of colours, colourless, golden, red oxide,
black, grey and white. For dip, brush or spray application.
Elmotherm® VA 160 25 – 35 s
Ford 4 Cup
25 °C
155 24 h / 25°C or
2 h / 80°C
Single component, UL recognised, alkyd resin based,
solvented finishing varnish, fast air drying, available
colourless or red oxide. For dip, brush or spray
application.
Aquanel® H 2001 300 – 500
mPa.s
25 °C
180 3 h / 23°C Single component, UL recognised, water based, epoxy
modified varnish, low VOC. Good bond strength,
moisture and chemical resistance. Suitable for motors,
coils and transformers. For dip and brush application.
Aquanel® H 2002 1100 – 1300 cps
Brookfield
25 °C
180 3 h / 23 °C Single component, UL recognised, water based,
epoxy modified varnish, red pigmented version, low
VOC. Good bond strength, moisture and chemical
resistance. Suitable for motors, stators and coils. For
dip and brush application.
This is only a selection of our product portfolio, more products are available on request.