White pigmented impregnation resins from ELANTAS Europe have specifically been developed
for the impregnation of ballasts for fluorescent lamps and special small to medium-sized transformers.
Due to their very good penetration properties our white pigmented resins also fill the
finest gaps of copper coils and thanks to the excellent strengthening of the winding any associated
humming noise is being prevented. We guarantee the quality and high reliability of an
impregnation with a white pigmented resin from ELANTAS Europe.
Special properties
Innovation and environmental protection are values we are committed to. With our products we
offer completely VOC-free white pigmented resins. Therefore we – as well as you as a user – are
contributing considerably to reduce organic emissions.
The available product range of our white pigmented resins is the result of a continuous development
process and steady improvement. So, today several one and two component systems
which are corresponding with your individual application conditions are at your disposal. Due to
the high reactivity of our white pigmented resins you can realize short cycle times at curing temperatures
from 130 °C and all this with a very good storage stability. Best covering power and
optimal edge covering are also well understood as is the good printability of the cured material.
Saving costs
Our white pigmented resins are optimized in order to receive minimal drain and exhaust steam
losses. Therefore you are not only reducing the cleaning efforts concerning your ovens but also
attaining direct cost advantages.
You can meet the requirements of the VOC guideline with our VOC-free white pigmented resins
and forget about a costly retrofit or expensive use of an afterburning system. By abandoning
monomers with their low flash points precautions against offensive smell and/or fire prevention
can be dropped.
Let us also convince you with our deep knowledge and long-term experience.
Product Viscosity Temperature
Index
Typical Cure
Schedule
Description
Dobeckan® F 2504 E 55 – 65 s
ISO Cup 6 mm
23 °C
180 140 °C / 1 h Two component, unsaturated
polyester resin, contains styrene,
brilliant white, high covering
power, designed for ballasts and
transformers. For VI application.
Dobeckan® F 2506 E 50 – 70 s
ISO Cup 6 mm
23 °C
180 140 °C / 1 h Two component, unsaturated
polyester resin, contains styrene,
brilliant white, low secondary
drainage, designed for ballasts
and transformers. For VI
application.
Dobeckan® F 2507 70 – 90 s
ISO Cup 6 mm
23 °C
180 140 °C / 1 h One Component, unsaturated
polyester resins, contains styrene,
matt-shiny, very good hiding
power, designed for ballasts
with and without housings, for
VI application.
This is only a selection of our product portfolio, more products are available on request.